How we value-engineered a Las Vegas office build-out and cut $52,000 (19%).

WarehouseSTAYS AS-ISLobbyOfficeOfficeConferenceBreakroomRestroomRestroomJan.HALLWAY · RECEPTION1,209 SFCONCEPTWarehouse office build-out$$52,000 saved$$$

Price a space three times before you build:1.Test-fit budget, $190,000. Does the deal work?2.Bid set price, $271,000. What do the drawings actually cost?3.Value-engineered price, $219,000. How much can come back out?Many contractors would have stopped at step 2. On this 1,209 SF office build-out in North Las Vegas, we went a step further without being asked and saved the owner $52,000 (19%), with the same rooms, the same layout and the same code requirements.The fix: Hire a proactive contractor. Bring them in early, and expect them to read every set of plans looking for ways to add value and bring down cost, not just to hand back a number.

The project

An architect we work with was in early design and introduced us to the broker running the bid for the owner. The owner wanted to turn part of a warehouse into an office: lobby, reception, two private offices, a conference room, a breakroom, two restrooms and a janitor closet.

All we had was the architect's test-fit, a one-page room layout. We priced it, sent the budget to the broker and walked the space with him the next day.

Stage 1 · Test-fit budget$190,000about $170 per sq ft
Stage 2 · Bid set price$271,000about $224 per sq ft
Stage 3 · Value-engineered$219,000about $181 per sq ft

Prices from our proposals for this project, rounded to the nearest $1,000, excluding design, permit and utility fees. Every space is different; this is an example, not a quote.

Three prices, step by step

Each price answered a different question, and each one came as the design got more detailed.

Savings for the owner: $52,000 (19%)

  1. Stage 1: The test-fit budget, $190,000. The test-fit showed 1,122 SF of rooms but no wall heights, finish specs, fixtures or equipment. It's a go/no-go number and a budget to design to, and we listed what was drawn but not included, like the mezzanine.

  2. Stage 2: Pricing the bid set, $271,000. In October the owner sent the architect's bid set and asked for a final proposal. It was architectural only, with no mechanical, plumbing or electrical drawings, so we priced those trades from the architectural sheets and current supplier prices.

  3. Stage 3: Value engineering, $219,000. Instead of stopping at the bid set price, we read the plans, looked for ways to value-engineer the cost down, and laid them out as a list of choices for the owner to make.

What the bid set added

We laid the bid set side by side with the test-fit so the owner could see what moved and why.

What the plans addedEffect on price
Perimeter walls full height to the roof deck, about 24 feetFraming, insulation and drywall $20,000 → $38,000
Shower and flush-valve toiletsPlumbing $37,000 → $44,000
Porcelain tile floors and walls in both restroomsNew, $14,000
Fire sprinkler required by the plans$10,000
Three pass-through and six interior windowsGlazing $5,000 → $7,000
Contractor-furnished appliancesNew, $4,000
Area grew from 1,122 to 1,209 SFAcross all trades

The bid set price

+$81,000 (42%)

over the test-fit budget: $190,000 to $271,000, about $224 per square foot.

Nobody made a mistake. A test-fit is a sketch, and a bid set is a hundred decisions with a price on each. That number is where most contractors stop.

How we value-engineered it down to $219,000

Value engineering means delivering the same function for less. We sent the owner a 14-item list, each option tied to the plan sheet it changes, with a Yes/No box. The architect confirmed the code items, and the owner approved nearly all of them the next day.

Value engineering optionSavings
Perimeter walls stop 6" above the 10-foot ceiling instead of 24 feet to the deck (architect confirmed not required by code)$14,000
Restrooms: LVT floors and vinyl base instead of porcelain tile; epoxy paint instead of wall tile$13,000
Delete the shower, smaller water heater, ADA tank-type toilets$7,000
One pass-through window instead of three; lites in the doors instead of sidelites; 1/4" tempered glass$5,000
Owner supplies the refrigerator; economy dishwasher$3,000
7-foot doors instead of 8-foot; factory-finished wood doors$2,000
Standard lay-in ceiling tile$2,000
Fewer upper cabinets, no tall cabinet$1,000
Delete the baby changing station$600

Saved by value engineering

−$52,000 (19%)

off the bid set price: $271,000 down to $219,000, about $181 per square foot.

The line items themselves saved $47,000. The rest came off costs that scale with the size of the job.

We didn't touch the HVAC, electrical, sprinkler, layout, room count or ADA items. The two biggest savings were wall height above the ceiling, which no one would ever see, and restroom tile.

How the three prices compare

Value engineering brought the walls, doors, windows, restroom finishes and plumbing back to or below the first budget. HVAC and electrical rose with supplier prices and stayed there, which is most of the remaining gap.

Part of the jobTest-fitBid setFinal
Walls: framing, insulation, drywall$20,000$38,000$24,000
Doors and windows$15,000$16,000$9,000
Restroom tile and accessoriesNot shown$19,000$4,000
Plumbing$37,000$44,000$37,000
Breakroom cabinets and appliances$5,000$10,000$6,000
HVAC and electrical$54,000$64,000$64,000
Total$190,000$271,000$219,000

Prices from our proposals for this project, rounded to the nearest $1,000, excluding design, permit and utility fees. Every space is different; this is an example, not a quote.

How owners get savings like this

The fix

Hire a proactive contractor

Bring your contractor in early, and expect them to read every set of plans looking for ways to add value and bring down cost, not just to hand back a number. A good one will:

  1. Price every stage

    Give you a number at the test-fit, again when the plans arrive, and show what moved in between.

  2. Read the plans for savings

    Look for cost nobody will see or miss, like walls running past the ceiling or finishes a space doesn't need.

  3. Give you yes-or-no choices

    Lay out each option with its savings and the plan sheet it changes, so you decide fast.

How it ended

The owner was ready to start. Then the broker brought in a full-price offer for the building as it stood, and the owner sold instead of building out the space. We never built it, but the owner saw how we work.

Josh's take

"I come from an owner and developer background, so I approach construction the way an owner or developer would. I'm always looking for ways to create value and reduce costs. Anyone can take a set of plans and give you a number. The value is in reading those plans and finding ways to reduce costs and create value. On this job, a lot of the cost went into things nobody would ever notice or miss. We found those items before anyone asked, laid them out as yes-or-no choices, and got the price back close to where we started to help the owner save money."

What owners should take from this

  1. Treat a test-fit price as a starting budget. Expect it to move once the plans add wall heights, finishes and fixtures.

  2. Ask for a line-by-line comparison when the plans arrive. You should see every change and its cost, not just a new total.

  3. Value-engineer before permit submittal. Changing the drawings once, before plan review, costs far less than after.

  4. Look above the ceiling and behind closed doors first. That is where money hides.

Pro tip: Detailed plans make savings possible

A competent architect with a detailed set of plans is worth the money. Detailed plans are what made line-by-line savings possible here.

Frequently asked questions

What is value engineering in construction?

It is reviewing the plans line by line for lower-cost materials or methods that keep the space's function and code compliance, before construction starts.

Why did the price off the plans come in higher than the test-fit budget?

A test-fit only shows the room layout. A full set of plans adds more detail, like wall heights, finishes, fixtures and code items, and those details ultimately drive the price.

When should value engineering happen?

Before permit submittal, so the architect revises the drawings once instead of after plan review.

How much can value engineering save?

On this project it saved $52,000, or 19% of the price off the bid set. Results vary with the design and the space.

Thinking about a space?

Cardo Construction builds office, retail, medical and restaurant tenant improvements across the Las Vegas valley. Send us the test-fit or the plans, and we'll price it early and look for ways to save you money before you build. Call Josh at 702-857-1800.

Sources

  1. Cardo Construction proposals for this project: test-fit budget (August 27, 2026), bid set proposal (October 15, 2026), value engineering options (October 22, 2026) and value-engineered proposal (October 28, 2026).

  2. Cardo Construction, FAQ (office tenant improvement cost and schedule ranges).

Start a project

Let's buildsomethingawesome.

Tell us about the site, the brand and the opening date. You'll talk directly with the people who build it.

Office

9330 W. Sahara Ave., Ste. 230
Las Vegas, NV 89117